Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Figure 3-86
Filter Setup Dialog Box
Noise Threshold
Use FIR Filter
FIR Filter Factor
12. Click [Measure] button to start measurement.
Figure 3-87
Measurement Execution
Measurement
The upper portion of the menu shows the measurement results of the WW (Write
Display
Width), RW (Read Width), RW (Read Write) offset, Squash, Squeeze and OTRC. The
lower left side of the graph shows the Track Profile, Squeeze and OTRC waveform.
OTRC is expressed in terms [µm].
13. To observe the signal track profile, click [Signal Profile] button.
138
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifies the noise threshold.
(check box)
Selects to use FIR filter or not.
Specifies the FIR filter factor.
Chapter 3
Advertisement
Table of Contents
