Table of Contents
Advertisement
Measurement Definition
Measurement Parameter Definition
Sample sequences of track offset compensation function is shown in Figure 5-33.
In the track profile measurement in the VEE measurement program, the head position is
compensated just once before the sequences of writing and reading a data pattern.
In the sample program shown in the programming manual, the sequences of reading burst
pattern and setting the head offset compensation are performed each 10 revolution during
measuring TAA parameters. Off course, you can create your own flow for the other
measurements in your programming.
Chapter 5
279
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
