Table of Contents
Advertisement
NOTE
The Bit Rate Start, Bit Rate Stop, Bit Rate Step and Bit Rate NOP are all reflected in both
Channel Bit Rate Set Up menu and Channel Bit Rate Sweep PW menus.You can use either
of the two menus to set the parameters.
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
7. Click the [Measure] button to start measurement. When [Auto Scale] is pressed the
graph scale will adjust itself automatically to its maximum and minimum values.
NOTE
Click on the "Save Trace" button to save the swept measurement data. A file menu will pop
up that will require the user to enter a file name (e.g., FileName.csv).
8. Click on the [PW Trace] button to view the PW, PW+ and PW-. Click on the [PW
Asym. Trace] button to view the results.
9. Click the [Return] button to return to Measure menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Measurement
123
Advertisement
Table of Contents
