Table of Contents
Advertisement
Figure 5-8
Read-write iteration in each segment (sector)
The length of write and read in each sector can be specified by the write ratio and read ratio
parameters. The portion named "I" is defined as an idle section or delay time.
Figure 5-9
Write/Read Ratios
The illustration above shows the partition of the write ratio, read ratio and idle in a single
sector. See the Stability Functions in the Programming Manual.
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Measurement Definition
Measurement Parameter Definition
249
Advertisement
Table of Contents
