Figure 3-116
Overwrite Menu
Channel Bit Rate
Write Current
Sense Current
OverwriteHF
OverwriteLF
Track #
Average
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
4. Click the [Measure] button to start measurement.
Measurement
The menu shows the mean, minimum, maximum and standard deviation of the
Display
measured Overwrite.
5. Click on the [Return] button to return to Measure menu.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the speed at which data bits are
written on the media per second [bps].
Specifies the current applied to the write head.
Specifies the current applied to the read head.
Specifies the repetitive period of the HF
pattern for overwrite measurement.
Specifies the repetitive period of the LF
pattern for overwrite measurement.
Specifies the track number to be tested.
Specifies the number of revolutions to get the
average results.
Measurement
193