Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
6. Click on the [Measure] button to start measurement. Results will be displayed after
NOTE
Click on the "Save Trace" button to save the swept measurement data. A file menu will pop
up that will require the user to enter a file name (e.g., FileName.csv).
7. Click the [Return] button to return to Track Profile menu.
See also
8. See "Track Offset Compensation Function" on page 274 and the "Track Profile
NOTE
Track Offset Compensation can not be used when the system has E4402B 3GHz spectrum
analyzer.
104
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
measurement.
The measured results of the track profile are displayed on this menu. This menu also
reports the computed 'Track Width' and 'Read/Write Offset'.
measurement function" section in Chapter 3 of the programming manual for the
parameter and detailed description.
Chapter 3
Advertisement
Table of Contents
