Table of Contents
Advertisement
Introduction
System Structure
The XY stage of the spinstand and spindle as controlled by the spinstand controller, this is
controlled by the PC through RS-232C.
NOTE
The power management of your PC has been set to OFF at factory shipment. If this is set to
ON, it will slow down the measurement proceedings.
CAUTION
Agilent Technologies does not warrant any troubles and damages caused by computer
virus. Protection, recovery, and the installation of any anti-virus software are to be
performed under the responsibility of the Users.
Software
The PC of Agilent E5022/E5023 uses an English version of the Windows 95 or 2000 as its
operating system. Windows 98/Me/NT and the other language version of Windows 95 are
not supported.
The following items have been installed at the factory before shipment.
•
•
•
•
E5022/E5023 System Software
E5022A system software is a package includes many software to control E5022/E5023.
The system software mainly can be divided into three parts, Measurement Library, VEE
Measurement Program, and Sample Program. The latest system software can be
downloaded from the website "http:\\dst.tm.agilent.com\".
E5022/E5023 Measurement Library
E5022/E5023 Measurement Library is a dynamic link library designed to facilitate
measurement programming. This creates an environment that makes the E5022A/B into an
integrated system rather than a rack-and-stack set of instruments, which allows the
instruments to perform at a higher level as a system.
The Measurement Library includes the DLLs to control the head amplifier and HGA
cassette. The DLLs are stored in the directory named "c:\Program
Files\Agilent\e5022\plugins\". The DLL files of head amplifiers and HGA cassettes named
as its part number. When new head amplifiers and HGA cassette are released, new DLLs
for them are provided as a service release software. It puts the new DLLs into the directory.
The service release software also can be downloaded from the website
"http:\\dst.tm.agilent.com\.
There are two kind of software. One is stored in the PC. The other is stored in the modules
(E5035, E5037, E5038, E5039, E5040 and E5041). The installer install s both of them.
They have their own revisions and they must be the same in one system. When you replace
32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
E5022/E5023 System Software
— E5022/E5023 Measurement Library
— E5022/E5023 VEE Measurement Program
— Sample Program (Visual Basic)
Agilent I / O Library
Agilent VEE Pro 6.0
Adobe Acrobat Reader
Chapter 1
Advertisement
Table of Contents
