Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Figure 3-49
TAA Track Profile Menu
3. Set the parameters, click on each button to enter a new value.
Program Read Offset
Auto TAA Range
Track Offset Compensation
Channel Bit Rate
Write Current
Sense Current
Data Pattern
100
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifies the auto setting of the read-write
offset when track profile is performed. If you
check this box the write offset and read offset
of the [Spinstand] menu will change
automatically. The write offset is set to zero
while the read offset is set to the "Read-Write
Offset" value of this measurement.
(Specifies the TAA range to auto mode.)
Checking this box will eliminate an overflow
of TAA measurement. The range
automatically adjusts itself to an appropriate
range when an overflow occurs. See
"hpe5022_isolatedPulseReferenceTaaAuto"
of the programming manual.
Checking this box will activate a track offset
compensation function. See "Track Offset
Compensation Function" on page 274.
Specifies the speed at which data bits are
written on the media per second [bps].
Specifies the current applied to the write head.
Specifies the current applied to the read head.
Specifies the data pattern to be written on the
test track. To set the data pattern, click on the
Chapter 3
Advertisement
Table of Contents
