Table of Contents
Advertisement
3. The head moves to the ramp load position with the specified speed.
4. The head is unloaded.
5. The ramp moves to the Ramp Out position from the Ramp In position.
The Ramp In position and the Ramp Out position are defined as follows.
Ramp In
Ramp Out
Figure H-10
Ramp In and Ramp Out Position (Picture is UP Face)
Appendix H
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
A position where the ramp onto the media as shown in Figure H-10.
The head is loadable when the ramp is in Ramp In position.
A position where the ramp is out of the media as shown in Figure
H-10. Usually, the ramp is in Ramp Out position during the
measurement to avoid the collision with the HLM.
Ramp Load
Ramp Load
439
Advertisement
Table of Contents
