Table of Contents
Advertisement
Average
Track #
Meas. Type
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
3. Click the [Measure] button to start measurement. When [Auto Scale] is pressed the
graph scale will adjust itself automatically to its maximum and minimum values.
4. Click the [Return] button to return to Measure menu.
See also
See the "PW measurement function" section in the chapter 3 of the programming manual
for the parameter range and its detailed description.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Specifies the number of revolutions to get the
average results.
Specifies the track number to be tested.
Specifies the type of measurement sequence.
1)[Erase Write Meas.] means to perform a DC
erase, write data then measure. 2)[Write
Meas.] means to write data, then measure. 3)
[Meas.] means to measure only.
Measurement
71
Advertisement
Table of Contents
