Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
NOTE
The parameter values of Channel Bit Rate, Write Current and Sense Current that have been
set in the [Configuration] menu will automatically update similar parameters in this menu.
3. Click on the [Measure] button to start measurement.
Measurement
Display
4. Click the [Return] button to return to Measure menu.
144
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sense Curr. Step
NOP
Center Freq.
The left portion of the window shows the results of Narrow Band TAA as a function of
change in the sense current.
Specifies the step by which sense current is
incriminated while measuring Narrow Band
TAA. When you set this parameter with
[Sense Curr. Start] and [Sense Curr. Stop],
[NOP] will be computed and updated
automatically.
Specifies the number of points to measure
Narrow Band TAA relative to the change in
sense current. When you set this parameter
with [Sense Curr. Start] and [Sense Curr.
Stop], [Sense Curr. Step] will be computed
and updated automatically.
Specifies the measurement frequency for
baseline popping test.
Chapter 3
Advertisement
Table of Contents
