Table of Contents
Advertisement
Data Rate Sweep
Overview
This section describes the Data Rate Sweep measurement. Data Rate Sweep measurement
is used for both bit error rate and channel quality measurements.
Measurement
1. To open the Data Rate Sweep menu, click on the [Data Rate Sweep] button from the
Procedure
BER Main menu.
Figure 3-112
Data Rate Sweep Menu
NOTE
Before you execute this measurement, you should set an appropriate input range or execute
the Auto Configuration to set the input range automatically.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VEE Measurement Program Operation
Measurement
179
Advertisement
Table of Contents
