Table of Contents
Advertisement
•
Squeeze Profile
The imaginary track profiles are plotted on both side of the original track profile at
the setting of squeeze position apart from the original track profile position. In the
E5022A/B triple track profile sequence, the imaginary track profile position is
rounded to the step of track profile measurement as shown in Figure A-2.
On revision A.03.81.04 and below, the right imaginary track profile position is
rounded at:
Equation A-2 Right Imaginary Track Profile Position in Revision A.03.81.04 and below
On revision A.04.00 and above, the right imaginary track profile position is
rounded at:
Equation A-3 Right Imaginary Track Profile Position in Revision A.04.00 and above
The left side of the imaginary track profile is the same for both revision.
Appendix A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Changes in Revision A.04.00 from Revision A.03.81.04
SqueezePos
------------------------------ -
int
+
1
Step
SqueezePos
×
------------------------------ -
int
Step
×
Step
Step
Manual Changes
363
Advertisement
Table of Contents
