Agilent Technologies E5022A Operation Manual page 446

Hard disk read/write test system

Hide thumbs Also See for E5022A:

Table of Contents

The current head position is specified as the ramp load position. And, the position is

specified as the media load position which is the distance you entered away from the

current head position toward to the media.

Step 8. If necessary to perform the ramp load test, click the

menu as shown in Figure H-13 is displayed. Click the

moved in order. Click the

Remove the media from the disk clamp before ramp load test because the media does not

rotate during this test.

Step 9. Click the

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

button to return to the main menu.

button of the main menu, then the ramp load positioning utility is closed.

Ramp Load Positioning Utility

button then "Ramp Load Test"

button, then the head is

E5022b E5023a