Table of Contents
Advertisement
VEE Measurement Program Operation
HGA Cassette Parameter Configuration
NOTE
When the FIC length of cassette is adjustable such as E5029C Option C11, the letters "s"
(short length), "m" (medium length) and "l" (long length) is added as subscript to the
cassette's part number (e.g, "E5010-61145s", "E5010-61145m" or "E5010-61145l"). Refer
to Option C11 on page 277 for details.
Figure 3-4 HGA Parameters
2. Click the [Set] button to set the parameters.
NOTE
If you want to save the parameters specified in this menu for future use, click on [Save
Parameter] button. A file menu will pop up, enter the file name in text format (e.g.,
FileName.txt). There is no need to assign a sub-file name. To load the saved file, click on
[Load Parameter] button.
3. Click the [Close] button to return to main menu.
48
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
•
HGA tip to Boss Center, specify the distance from the boss center to the tip of the
HGA as shown in (Figure 3-4 "tip").
•
HGA bottom to Boss Center, specify the distance from the boss center to the base
of the HGA as shown in (Figure 3-4 "bot").
•
Boss Inner Diameter, specify the inner diameter of the boss as shown in (Figure 3-4
"boss_id").
•
Select Cassette Type
When using Agilent designed cassette, check on "Agilent Cassette (Part Number)"
and enter the Agilent part number of the HGA cassette. The part number is printed
on top of the cassette. A string example is "E5022-61141s". If the cassette
parameters are stored in a text file (e.g., Cassette.txt), you can load the cassette
parameters automatically using the [Load Parameter] button.
When you use a customer-designed cassette, see the next section.
Chapter 3
Advertisement
Table of Contents
