Table of Contents
Advertisement
VEE Measurement Program Operation
Measurement
Sectored Overwrite Measurement
Overview
This section describes the Sectored Overwrite Measurement. This measurement is
performed by a spectrum analyzer.
Measurement
1. To open the Overwrite Selection Menu, click [Overwrite] in the Measure menu.
Procedure
NOTE
Before you execute this measurement, you should set an appropriate input range or execute
the Auto Configuration to set the input range automatically.
2. Click [Sectored Overwrite] to open the Sectored Overwrite Menu.
Figure 3-117
Overwrite Selection Menu
3. Set the parameters. Click each button to enter a new value.
194
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 3
Advertisement
Table of Contents
