Download Print this page

Final Tasks - Avaya S8700 Replacing Manual

Job aid replacing the media server - release 2.0 and later
Hide thumbs Also See for S8700:

Advertisement

Job Aid Replacing the Avaya S8700 Media Server—Release 2.0 and Later

Final tasks

Final tasks
If you are reusing the old hard drive, follow the procedure in
Server reusing the original hard drive
If not reusing the old hard drive, you must install the Linux operating system and Avaya Communication
Manager on the blank hard drive, then restore the backed up system files to the media server. Follow the
procedure in
Final tasks for replacing an S8700 Media Server using the blank hard drive
Except where noted in the following checklist, see Upgrading Software and Firmware— Avaya S8700
Media Server (555-245-115) on the Avaya S8300, S8500, and S8700 Media Server Library CD-ROM,
555-233-825, Issue 3, for details on the tasks.
Checklist 5. Final tasks for replacing an S8700 Media Server using the blank hard drive
9
Task
1
Connect laptop to the
replacement media server
2
Set Telnet parameters (if
necessary)
3
Install Communication Manager
4
Log onto the Maintenance Web
Interface
5
Check software version
6
Copy software update (patch)
files to media server (if any)
6
555-245-767, Issue 1.1
Final tasks for replacing an S8700 Media
on page 9
Description
Connect the laptop to the services port on the back of the media
server.
Open a Telnet session and type
Type
unset crlf
and press Enter.
Type
and press Enter to verify that message says
display
Sending only CR
Type
exit
and press Enter to close Telnet session.
You must install the software from the CD. For procedure details,
see
Installing the software
on page 15.
Open a browser on your laptop. Use 192.11.13.6 to log onto the
Maintenance Web Interface.
Note: Use the initial installation craft login and initial password.
Under Server, click Software Version to verify that the hard drive
has the correct release of Communication Manager.
Under Miscellaneous, click Download Files.
Browse to select the file for downloading and click Download.
Replacing the Media Server with Release 2.0—S8700
on page 6.
telnet
and press Enter.
December 2003

Advertisement

loading