Srx5400 Services Gateway Craft Interface Alarm Relay Contacts - Juniper SRX5400 Hardware Manual

Slot State
0 Online
1 Offline
2 Online
The command output indicates the MPC is offline.
Bring the MPC online for the first time by using the following CLI command:
user@host> request chassis fpc slot 1 online
node0:
--------------------------------------------------------------------------
Online initiated, use "show chassis fpc" to verify
Verify that the MPC is online:
user@host> request chassis fpc slot 1 online node 0
node0:
--------------------------------------------------------------------------
FPC 1 already online
The command output indicates the MPC is online.
Confirm that the MPC in the chassis is online:
user@host> show chassis fpc
node0:
--------------------------------------------------------------------------
Slot State
0 Online
1 Online
2 Online

SRX5400 Services Gateway Craft Interface Alarm Relay Contacts

The craft interface has two alarm relay contacts for connecting the device to external alarm devices (see
Figure 5 on page 40). Whenever a system condition triggers either the major or minor alarm on the craft
(C) Total Interrupt
37 23
---Offlined by cli command---
49 37
Temp CPU Utilization (%)
(C) Total Interrupt
37 6
44 11
49 22
DRAM (MB) Heap
0 2048 19
0 1024 14
Memory Utilization (%)
DRAM (MB) Heap
0 2048 19
0 1024 23
0 1024 14
39
Buffer
14
25
Buffer
14
29
25