Srx Series Services Gateway Interface Modules Support; Srx Series Services Gateway Interface Overview - Juniper SRX Series Manual

CHAPTER 1
SRX Series Services Gateway Interface
Modules Support

SRX Series Services Gateway Interface Overview

Copyright © 2015, Juniper Networks, Inc.
SRX Series Services Gateway Interface Overview on page 3
Interfaces Port Naming Conventions SRX Series Services Gateways on page 4
Physical Interface Modules Supported on SRX Series Services Gateways on page 6
SRX Series Services Gateway Mini-Physical Interface Modules Overview on page 7
SRX Series Services Gateway Gigabit-Backplane Physical Interface Modules
Overview on page 8
SRX Series Services Gateway Interface Modules and Compatibility on page 11
MTU Default and Maximum Values for Physical Interface Modules on page 12
Power over Ethernet Support on SRX Series Services Gateway Interfaces on page 16
SRX Series Services Gateway Interfaces Power and Heat Requirements on page 17
Mini-Physical Interface Modules (Mini-PIMs) and Gigabit-Backplane Physical Interface
Modules (GPIMs) are field-replaceable network interface cards (NICs) supported on the
Juniper Networks SRX Series Services Gateway for the branch. You can easily insert or
remove Mini-PIMs and GPIMs from the front slots of the SRX Series Services Gateway
chassis. The Mini-PIMs and GPIMs provide physical connections to a LAN or a WAN. The
Mini-PIMs and GPIMs receive incoming packets from the network and transmit outgoing
packets to the network. During this process, they perform framing and line-speed signaling
for the medium type. The SRX Series Services Gateways run Junos OS.
CAUTION: The Mini-PIMs available on the SRX Series Services Gateway are
not hot-swappable. You must power off the services gateway before removing
or installing Mini-PIMs.
NOTE: Only the SRX650 Services Gateway supports hot-swappable
functionality for GPIMs. The SRX550 Services Gateway does not support
hot-swappable functionality for GPIMs.
3