Suzuki WagonR+ RB310 Service Manual page 2586

INSTALLATION
1) Clean mating surfaces of fuel pump assembly and fuel tank.
2) Install new gasket (2) and plate (3) to fuel pump assembly (1)
then install fuel pump assembly to fuel tank.
Tightening Torque
.
(a): 10 N m (1.0 kg-m, 7.5 lb-ft)
3) Connect fuel breather hose (1), fuel vapor hose (2) and fuel feed
hose (3) to fuel pump assembly.
CAUTION:
When connecting joint, clean outside surface of pipe
where joint is to be inserted, push joint into pipe till joint
lock clicks and check to ensure that pipes are connected
securely, or fuel leak may occur.
4) Install fuel tank (1) to vehicle. Refer to FUEL TANK INSTALLA-
TION in this section.
ENGINE FUEL 6C-15