Suzuki WagonR+ RB310 Service Manual page 2106

REMOVAL
1) Remove compressor from vehicle. Refer to COMPRESSOR in
2) Fix clutch plate (1) with special tool (A) and remove clutch plate
3) Using special tool (B) if necessary, remove clutch plate (1).
4) Remove shims from shaft.
5) Using special tool (C), remove circlip.
6) Remove clutch coil read wire clamp by loosening its screw and
7) Remove clutch pulley (2) with puller (1).
8) Remove clutch coil.
9) Remove circlip (1) by using special tool (C).
10) Remove clutch coil (2) from compressor (3).
1. Snap ring
2. Clutch coil
3. Compressor assembly
this section.
bolt (2) and washer (3).
Special Tool
(A): 09991-06020
Special Tool
(B): 09991-06030
Special Tool
(C): 09900-06107
disconnect clutch coil read wire from thermal switch read wire.
NOTE:
Be careful not to damage pulley when tapping clutch
pulley.
AIR CONDITIONING (OPTIONAL) 1B-27