Suzuki WagonR+ RB310 Service Manual page 3070

INSTALLATION
1) Install passenger air bag (inflator) module (1) to vehicle.
2) Tighten passenger air bag (inflator) module attaching bolts to
specified torque.
Tightening Torque
.
(a): 23 N m (2.3 kg-m, 16.5 lb-ft)
3) Set glove box (2) to original position of instrument panel and
open it, install glove box clips (3).
4) Connect negative battery cable to battery.
5) Enable air bag system. Refer to "Enabling Air Bag System" earli-
er in this section.
DRIVER AIR BAG (INFLATOR) MODULE
Refer to SECTION 3C for removal, inspection and installation.
CONTACT COIL AND COMBINATION SWITCH
ASSEMBLY
Refer to SECTION 3C for removal, inspection and installation.
SEAT BELT PRETENSIONER
Refer to SECTION 10A for removal, inspection and installation.
AIR BAG WARNING LAMP
Refer to SECTION 8C for removal and installation.
AIR BAG SYSTEM 10B-53