Suzuki WagonR+ RB310 Service Manual page 2202

ASSEMBLY
For assembly, reverse disassembly procedure, observing following
instructions.
D Apply grease to bearing seal, strut bearing and sliding part of strut
rod.
D Mate spring end with stepped part of spring lower seat as shown.
D Install spring seat, mating stepped part of seat with spring upper
end as shown.
D Using special tools, tighten strut nut to specified torque.
Special Tool
(A): 09900-00411
(B): 09900-00414
(C): 09945-26010
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.0 lb-ft)
FRONT SUSPENSION 3D-9