Suzuki WagonR+ RB310 Service Manual page 2711

7A-20 MANUAL TRANSMISSION
SUB ASSEMBLY SERVICE
NOTE:
Before installation, wash each part and apply specified gear oil
to sliding faces of bearing and gear.
RIGHT CASE
1) Install input shaft oil seal (1) facing its spring side upward. Use
special tool and hammer for installation and apply grease to oil
seal lip.
"B": SUZUKI SUPER GREASE A, 99000-25010
Special Tool
(A): 09951-76010
2) Install countershaft right bearing cup (2) by using special tools
and hammer.
Special Tool
(B): 09924-74510
(C): 09925-68210
LEFT CASE
1) If input oil gutter has been removed, install it with bolt applied
with thread lock cement.
"A": Thread lock 1322, 99000-32110
Tightening Torque
.
(a): 10 N m (1.0 kg-m, 7.5 lb-ft)
2) Install differential side left oil seal (1) facing its spring side inward
until it becomes flush with case surface by using special tool with
hammer, and then apply grease to its lip.
"B": SUZUKI SUPER GREASE A, 99000-25010
Special Tool
(A): 09913-75510
3) Install counter shaft left bearing cup into case bore by tapping
it with plastic hammer lightly.