Suzuki WagonR+ RB310 Service Manual page 2199

3D-6 FRONT SUSPENSION
Front
D Install mounting bracket (1) so that its oblong hole side (2) comes
to the rear.
D Tighten stabilizer bar bracket bolts to specified torque.
Tightening torque for stabilizer bar bracket bolts:
.
45 N m (4.5 kg-m, 32.5 lb-ft)
D After tightening castle nut (1) to specified torque, install new split
pin (2) as shown.
Tightening Torque
.
(a): 40 – 90 N m (4.0 – 9.0 kg-m, 29.0 – 65.0 lb-ft)
D Install wheels and tighten wheel nuts to specified torque.
Tightening Torque
.
(c): 85 N m (8.5 kg-m, 61.5 lb-ft)