Suzuki WagonR+ RB310 Service Manual page 2953

8G-18 IMMOBILIZER CONTROL SYSTEM
DTC B3060 INCORRECT TRANSPONDER DETECTED
DTC DETECTING CONDITION AND TROUBLE AREA
DTC DETECTING CONDITION
FIX CODE does not match with registered one.
FIX CODE is not registered in immobilizer control
module.
TROUBLE SHOOTING (DTC B3060)
STEP
1 Is DTC B3056 also output?
2 Check DATA LIST "TRANSPONDER FC".
Is it registered?
3 Register transponder according to HOW TO
REGISTER IGNITION KEY under ON-VEHICLE
SERVICE.
Check SUZUKI scan tool DATA LIST for
"FIX CODE".
Is it registered?
ACTION
TROUBLE AREA
Unregistered ignition key with built-in transponder
Ignition key with built-in transponder faulty
Immobilizer control module
YES
Proceed DTC FLOW
TABLE of DTC B3056.
Then go to step 2.
Replace ignition key
with built-in
transponder.
Then go to step 3.
Transponder FIX
CODE is registered.
NO
Go to step 2.
Go to step 3.
Transponder
registration procedure
is not completed
correctly.
Register ignition key
again.