7B-122 AUTOMATIC TRANSMISSION (4 A / T)
2. New bolt
47) Install differential gear assembly (1).
NOTE:
Grease can be applied around the R and L bearing of differ-
ential gear assembly to ease fitting to the transmission
case and torque converter housing.
48) Install thrust bearing race (1) and thrust needle roller bearing
(2) to the top of counter driven gear (3).
49) Apply grease to oil pump D-ring.
Install new gasket to transmission case and install torque con-
verter housing (1).
Tightening Torque:
.
(h): 19 N
m (1.9 kg-m, 14.0 lb-ft)
Grease: 99000-25030
NOTE:
Apply thread lock to the three bolts shown in figure.