Suzuki WagonR+ RB310 Service Manual page 2565

6B-8 ENGINE COOLING
ON-VEHICLE SERVICE
WARNING:
D Check to make sure that engine coolant temperature is
cold before removing any part of cooling system.
D Also be sure to disconnect negative cord from battery ter-
minal before removing any part.
COOLING SYSTEM DRAINING
1) Remove radiator cap.
2) Loosen drain plug (1) on radiator (2) to drain coolant.
3) After draining coolant, be sure to tighten drain plug securely.
4) Fill cooling system. (Refer to COOLANT in GENERAL DE-
SCRIPTION.)
COOLING WATER PIPES OR HOSES
REMOVAL
1) Drain cooling system.
2) To remove these pipes or hoses, loosen clamp on each hose
and pull hose end off.
INSTALLATION
Install removed parts in reverse order of removal procedure, noting
the following.
D Tighten each clamp securely.
D Refill cooling system with proper coolant, referring to COOLANT
in GENERAL DESCRIPTION.