3D-14 FRONT SUSPENSION
2) Install circlip (1).
Special Tool
(A): 09900-06108
3) Drive in dust cover (1) so that dimensions "a" and "b" become
equal as shown.
4) Caulk with a punch.
5) Insert new stud (2) in hub hole. Rotate stud (2) slowly to assure
serrations are aligned with those made by original bolt.
1. Oil hydraulic press
INSTALLATION
1) Using special tools and hydraulic press (1), drive wheel hub (2)
into steering knuckle (3) as shown.
Special Tool
(A): 09913-75520
(B): 09944-66020
CAUTION:
When drive in dust cover, be careful not to deform it.