A: Camshaft pulley side
B: CMP sensor case side
8) Install pistons and connecting rods as previously outlined.
9) Install oil pump strainer and oil pan as previously outlined.
10) Install cylinder head assembly to cylinder block as previously
outlined.
11) Install camshaft, crankshaft timing belt pulley, timing belt,
crankshaft pulley, water pump pulley, etc., as previously out-
lined.
(a)
12) Install clutch to flywheel (for M/T vehicle). For clutch installa-
tion, refer to "CLUTCH" section.
13) Install engine assembly to vehicle as previously outlined.
Tightening Torque
(a): 55 N
.
m (5.5 kg-m, 40.0 lb-ft)
ENGINE MECHANICAL 6A1-79