Suzuki WagonR+ RB310 Service Manual page 2685

6H-16 CHARGING SYSTEM
2
7) When removing rear bearing (1), use oil hydraulic press (2)
general rod (3) and general tool (4).
8) Remove three screws (1) and generator "B" terminal nut (2).
9) Remove stator with IC regulator assembly from rear housing.
10) Unsolder stator leads (1) and remove stator (2) from IC regula-
tor assembly.
11) To remove brush, remove holder (1) from brush holder (2) and
then disconnect brush wire (3) from regulator terminal using
soldering iron.
3
1