Suzuki WagonR+ RB310 Service Manual page 2224

1
Vehicle
Vehicle
out side
center
side
Vehicle
center
side
5) Remove parking brake cable clamp (1).
6) Remove trailing arm rear bolts (1).
7) Remove trailing arm front bolt (2) and then remove trailing arm
FORWARD
(1).
INSTALLATION
1) Install trailing arm (1) to vehicle body and rear axle, referring to
figure for proper installing direction of bolts (2) and then tighten
nuts (3) temporarily by hand.
Vehicle
out side
2) Install wheel speed sensor lead wire clamp, if equipped.
REAR SUSPENSION 3E-11