Suzuki WagonR+ RB310 Service Manual page 2203

3D-10 FRONT SUSPENSION
INSTALLATION
D Install strut assembly by reversing REMOVAL procedure.
CAUTION:
Don't twist brake hose when installing it.
Install E-ring as far as it fits to bracket as shown.
D Torque all fasteners to specification, referring to assembly figure
on 3D-7.
D Install wheel and tighten wheel nuts to specified torque.
Tightening Torque
.
(a) 85 N m (8.5 kg-m, 61.5 lb-ft)
D Confirm front end (wheel) alignment, referring to SECTION 3A.