5E1-12 ANTILOCK BRAKE SYSTEM (ABS)
BRAKE WARNING LAMP CHECK
NOTE:
Perform this check on a level place.
1) Turn ignition switch ON with parking brake applied.
2) Check that brake warning lamp (1) is turned ON.
3) Release parking brake with ignition switch ON and check that
brake warning lamp goes off.
If it doesn't go off, go to "TABLE-E" in this section.
"ABS" WARNING LAMP CHECK
1) Turn ignition switch ON.
2) Check that "ABS" warning lamp (1) comes ON for about 2 se-
conds and then goes off.
If any faulty condition is found, advance to Diagnostic Flow
Table-A, B, C or D.