Suzuki WagonR+ RB310 Service Manual page 2294

CAUTION:
Lubricate parts as specified. Do not use lubricated shop air on brake parts as damage to rubber compo-
nents may result. If any component is removed or line disconnected, bleed the brake system.
Replace pads in axle sets only. The torque values specified are for dry, unlubricated fasteners.
1-1. Guiding pin:
1-1. Locking pin:
Apply specified rubber grease to guiding and locking
pins surfaces for smooth movement.
1-2. Pin boot
2-1. O-ring
1-3. Disc brake caliper (disc brake cylinder)
1-4. Piston seal
1-5. Disc brake piston
1-6. Piston boot
1-7. Disc brake pad
1-8. Brake caliper carrier
1-9. Caliper bolt
1-10. Bleeder plug
1-11. Bleeder plug cap
1-12. Caliper pin bolt
1-13. Flexible hose bolt
1-14. Gasket
ON-VEHICLE SERVICE
FRONT BRAKE 5B-3
: Tightening Torque
: Do not reuse