Suzuki WagonR+ RB310 Service Manual page 2868

CLUTCH PEDAL AND CLUTCH PEDAL BRACKET
REMOVAL
1) Disconnect clutch cable hook from clutch pedal.
2) Remove attaching nuts and bolts.
3) Remove clutch pedal bracket with clutch pedal.
4) Remove each parts, if necessary.
INSTALLATION
Reverse removal procedure for installation, noting the following.
D Tighten each nuts and bolts to specified torque as indicated
above figure.
D After installing, adjust clutch pedal free travel.
D Check clutch for proper function with engine running.
CLUTCH 7C-7
1. Clutch cable hook:
Apply grease A 99000-25010 to
cable hook.
2. Clutch pedal bracket
3. Bolt
4. Nut
5. Pedal shaft nut
6. Pedal bush
7. Pedal spring:
Apply grease A 99000-25010 to
inside surface of spring.
8. Pedal shaft spacer:
Apply grease A 99000-25010 to
outside surface of spacer.
9. Pedal shaft
10. Pedal shaft stopper
11. Screw
12. Clutch pedal
13. Pedal pad
14. Pedal return cushion
15. Adjusting bolt cap
16. Adjusting bolt
17. Lock nut
18. Packing (in cabin)
: Tightening Torque
: Do not reuse