Suzuki WagonR+ RB310 Service Manual page 2812

FRONT CLUTCH (C2 CLUTCH)
DISASSEMBLY
1) Remove snap ring.
2) Remove flange (1), discs and plates.
3) Remove shaft snap ring (1).
Compress piston return springs and remove shaft snap ring.
Place special tool (clutch spring compressor) on spring seat and
compress spring with a press (2), and then remove shaft snap
ring, using a flat end rod or the like (3).
CAUTION:
Do not push down return spring more than necessary.
Special Tool
(A): 09926-96010
AUTOMATIC TRANSMISSION (4 A / T) 7B-81
1. Front clutch No.1 drum
2. D-ring
3. Front clutch piston
4. Front clutch return spring seat
5. Front clutch balancer
6. Shaft snap ring
7. Clutch plate
8. Clutch disc
9. Clutch flange
10. Snap ring