Suzuki WagonR+ RB310 Service Manual page 2518

14) Install engine right mounting bracket (1), stiffener (2) and en-
15) Remove support device.
16) Loosen cylinder head bolts in such order as indicated in figure
17) Check all around cylinder head for any other parts required to
A: Camshaft pulley side
B: CMP sensor case side
18) Remove cylinder head with thermostat case, intake manifold
gine right mounting swing bracket (3).
and remove them.
be removed or disconnected and remove or disconnect what-
ever necessary.
and exhaust manifold.
ENGINE MECHANICAL 6A1-43