Suzuki WagonR+ RB310 Service Manual page 2226

REAR AXLE
REMOVAL
1) Hoist vehicle and remove rear wheels (right & left).
2) Support rear axle (1) by using floor jack (2).
3) Remove rear brake drums (right & left). For details, refer to steps
2) to 6) of BRAKE DRUM REMOVAL in SECTION 5C.
4) Remove E-rings (2) (right & left) securing brake hose (1).
5) Disconnect brake pipe flare nuts (1) from wheel cylinders (3)
(right & left) and put bleeder plug cap (4) onto pipe (2) to prevent
fluid from spilling.
CAUTION:
Do not allow brake fluid to get on painted surfaces.
6) Remove brake back plates (1) (right & left) from rear axle and
hang removed brake back plate with a wire hook.
7) Remove lateral rod axle side nut (1).
REAR SUSPENSION 3E-13