3D-16 FRONT SUSPENSION
9) Depress foot brake pedal and hold it there.
Tighten new drive shaft nut (1) to specified torque.
Tightening Torque
(c): 175 N
10) Calk drive shaft nut as shown.
Calking drive
CAUTION:
shaft nut
Be careful while caulking nut so that no crack will occur
in caulked part of nut. Cracked nut must be replaced
with new one.
11) Install wheel and tighten wheel nuts to specified torque.
Tightening Torque For Wheel Nuts
85 N
1, (c)
.
m (17.5 kg-m, 127.0 lb-ft)
.
m (8.5 kg-m, 61.5 lb-ft)