MASTER CYLINDER RESERVOIR
CAUTION:
Observe CAUTION at the beginning of ON-VEHICLE SER-
VICE.
NOTE:
For right hand steering vehicle, remove and install master cyl-
inder reservoir according to procedure of MASTER CYLINDER
ASSEMBLY REMOVAL and INSTALLATION in this section.
REMOVAL
1) Clean outside of reservoir.
2) Disconnect reservoir lead wire at coupler.
3) Take out fluid with syringe or such.
4) Remove reservoir connector pin (1) using special tool.
Special Tool
(A): 09922-85811
5) Remove reservoir (1) and grommets (2) from master cylinder
(3).
BRAKES PIPE / HOSE / MASTER CYLINDER 5A-7