Suzuki WagonR+ RB310 Service Manual page 2835

7B-104 AUTOMATIC TRANSMISSION (4 A / T)
DIFFERENTIAL ASSEMBLY
Servicing procedure for differential assembly is similar to that for manual transmission. Refer to Section 7A of this
manual for adjustment procedure.
DISASSEMBLY
1) Remove R bearing and then speed sensor rotor using special
1. Differential gear ass'y
2) Hold differential ass'y with soft jawed vise, remove final gear (1).
3) Remove differential side L bearing (1).
tool and puller.
Special tool:
(A): 09925-88210
Drive it out by using special tool, bearing puller (2) and press.
Special Tool
(B): 09913-80112
1. Differential pinion
2. Differential gear
3. Washer (for pinion)
4. Pinion shaft
5. Washer (for gear)
6. Differential side oil seal
7. Differential right side bearing (R bearing)
8. Speedometer drive gear
9. Differential case
10. Final gear
11. Bolt
12. Differential left side bearing (L bearing)