Show Isis Hostname - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Level: 1.
Usage Guideline
This command is used to display the IS-IS interfaces information.
Example
This example shows how to display the IS-IS interface VLAN 1 information.
Switch# show isis interface vlan 1
vlan1 is up, line protocol is up
Routing Protocol: IS-IS ((null))
Network Type: Broadcast
Circuit Type: level-1-2
Local circuit ID: 0x1
Extended Local circuit ID: 0x1
Local SNPA: ca00.0f28.0000
IP interface address:
10.1.1.1
IPv6 interface address:
Level-1 Metric: 10, Priority: 64, Circuit ID: 0001.0001.0002.01
Number of active level-1 adjacencies: 1
Level-2 Metric: 10, Priority: 64, Circuit ID: 0001.0001.0002.01
Number of active level-2 adjacencies: 1
Next IS-IS LAN Level-1 Hello in 2 seconds
Next IS-IS LAN Level-2 Hello in 5 seconds
Switch#
48-41

show isis hostname

This command is used to display the router-name-to-system-ID mapping table entries for IS-IS.
show isis hostname
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the router-name-to-system-ID mapping table entries for IS-IS.
Example
This example shows how to display the router-name-to-system-ID mapping table entries.
620