Settings→Emulator Config→Hardware - HP 68302 User Manual

Chapter 8: Menu Bar Commands
Settings→Emulator Config→Hardware... (ALT, S, E, H)
Settings→Emulator Config→Hardware... (ALT, S, E,
H)
Specifies the emulator configuration.
Hardware Config Dialog Box
Choosing the Settings→Emulator Config→Hardware... (ALT, S, E, H)
command opens the following dialog box:
Clock Source
Enable Target
BR and BGACK
Signals
Enable Target
BERR Signal
Emulation
Memory Use
Target DTACK
Enable Target
INT Signals
300
Specifies the Internal or an External clock as the emulation
microprocessor clock source.
Enables or disables /BR and /BGACK input from the target
system.
Enables or disables /BERR input from the target system.
Enables or disables /DTACK input from the target system.
Enables or disables interrupts from the target system.