M320 Control Board (Cb) Leds; M320 Connector Interface Panel (Cip) Overview; M320 Connector Interface Panel (Cip) Description; Table 6: M320 Cb Leds - Juniper M320 Hardware Manual

M320 Control Board (CB) LEDs

Related
Documentation

M320 Connector Interface Panel (CIP) Overview

M320 Connector Interface Panel (CIP) Description

Copyright © 2010, Juniper Networks, Inc.

Table 6: M320 CB LEDs

Label Color
Blue
MASTER
Yellow
FAIL
Green
OK
M320 Chassis Description on page 6
M320 Control Board (CB) Description on page 23
Replacing an M320 CB on page 163
M320 Connector Interface Panel (CIP) Description on page 25
M320 Routing Engine Ports on page 26
T640 Alarm Relay Contacts on page 27
The Connector Interface Panel (CIP) consists of Ethernet, console, and auxiliary
connectors for the Routing Engines and alarm relay contacts (see Figure 13 on page 26).
The front electrostatic discharge point is located near the bottom of the CIP. The CIP is
located at the left side of the FPC card cage.
The CIP is hot-pluggable.
State Description
On steadily Control board is functioning as the master.
On steadily Control board has failed.
On steadily Control board is online and is functioning normally.
Blinking Control board is powering up, but not online.
Chapter 2: M320 Hardware Components
25