Enable - Dell C9000 Series Reference Manual

Example
Dell(conf-if-te-5/0)#do clear counters
Clear counters on all interfaces [confirm]
Dell(conf-if-te-5/0)#
Dell(conf-if-te-5/0)#do clear logging
Clear logging buffer [confirm]
Dell(conf-if-te-5/0)#
Dell(conf-if-te-5/0)#do reload
System configuration has been modified. Save? [yes/no]: n
Proceed with reload [confirm yes/no]: n
Dell(conf-if-te-5/0)#

enable

Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may
need to enter a password.
C9000 Series
Syntax
enable [level]
From a PE console, use enable [level] to enter EXEC privilege mode .
Parameters
level
Defaults 15
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.12.0
(OPTIONAL) Enter a number for a privilege level of Dell
Networking OS. The range is from 0 to 15.
Description
Introduced on the C9010 and C1048P.
Added support for roles on the Z9500.
Added support for roles on the Z9000, S6000, S4820T, S4810,
MXL
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Control and Monitoring 85