Ip Ssh Authentication-Retries; Ip Ssh Cipher - Dell C9000 Series Reference Manual

ip ssh authentication-retries

Configure the maximum number of attempts that should be used to authenticate a user.
C9000 Series
Syntax
ip ssh authentication-retries 1-10
Parameters
1-10
Defaults 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information This command specifies the maximum number of attempts to authenticate a user on
an SSH connection with the remote host for password authentication. SSH disconnects
when the number of password failures exceeds authentication-retries.

ip ssh cipher

Configure the list of ciphers supported on both SSH client and SCP.
Syntax
ip ssh cipher cipher-list
Enter the number of maximum retries to authenticate a user.
The range is from 1 to 10. The default is 3.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Security 1983