Table of Contents
Advertisement
Main Menu
Lights
Replacing a Front Turn Signal
Light Bulb
1. If your car does not have acces-
sory fog lights, remove the fog
light opening cover by removing
the phillips head screw from the
bottom and prying carefully
around the edges of the cover with
a flat-blade screwdriver.
2. Use a phillips-head screwdriver to
loosen the turn signal assembly's
mounting screw.
Maintenance
Table of Contents
3. Remove the turn signal assembly
from the bumper.
4. Remove the bulb holder from the
turn signal assembly by turning it
one-quarter turn to the left.
5. Remove the burned out bulb from
the socket by pushing it in and
turning counterclockwise until it
unlocks. Install the new bulb.
BULB
BULB HOLDER
6. Push the bulb holder into the turn
signal assembly and turn it clock-
wise until it locks.
7. Test the turn signals to make sure
the new bulb is working.
8. Put the turn signal assembly into
the bumper. Tighten the mounting
screw.
9. Snap the fog light opening cover
back in place. Reinstall the hold-
down screw.
Advertisement
Table of Contents
