Entering The Password (Edit ); Password Level - Siemens SIMATIC C7-613 Manual

Operating the C7-613
5.10.3

Entering the Password (Edit )

Overview
Passwords can be entered in the configuration (refer to Section 4.3.5) or via the
special screen Password > Edit.
Depending on your configuration you enter the values by using either the function
keys or the cursor keys (refer to Section 5.3).
Displaying the Password List
Select the special screen Password > Edit.
Your password, as well as all passwords that have a password level lower than
yours are displayed.
The password list contains 9 passwords. Password 0 for the superuser cannot be
displayed and cannot be edited.
Using the "Cursor up/down" keys, you can change from one password to the next.
You can use the F4 key to log on for a higher password level.
Figure 5-13
If you select the special screen "Password Edit" using your own process screens
or Control Job 51, you cannot select the special screen "Login" using the "F4" key.
In this case, you must call the "Password Login" screen using a process screen or
Control Job 51.
5-38
Password Edit:
No. Password Level
1
Example of a Password Entry
1234 2
F4->Login
C7-613 Control System
A5E00138934-03