Configure Subtended Host Information; Configure Subtended Host Information - ADTRAN Total Access 5000 Deployment Manual

Configure Subtended Host Information

To configure the subtended host information, complete the following:
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, type interface gigabit-ethernet
3. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host ip
4. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host ip
5. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host ip
6. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host
7. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host s-
8. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host
9. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host
10. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host
11. From the Gigabit‐Ethernet Interface Configuration prompt, type subtended-host
65K510DEP08-1A
bal Configuration prompt.
, and press E
<shelf/slot/port>
address A.B.C.D E.F.G.H
default-gateway A.B.C.D
file-server default host A.B.C.D
, and press E
mode
NTER .
, and press E
tag <1-4094>
, and press E
s-tag-priority
snmp-server chassis-id
snmp-server community read-only
snmp-server community read-write
Section 7, EoF Provisioning - Configure Subtended Host Information
.
NTER
, and press E
.
NTER
, and press E
NTER .
, and press E
NTER .
NTER .
, and press E
NTER .
, and press E
, and press E
NTER to get to the Glo‐
NTER .
NTER .
NTER .
7-5